BreakFlanges


	Centurion-150® Super Centurion-200® Super Centurion-250®

Genuine Mueller^® BREAK FLANGE Rebuild KITS


	For All Mueller^®Albertville"CENTURION" Series Fire Hydrants 4-1/2" and 5-1/4" Valve Opening Sizes


	Updated 01/26/2009


	The picture at left is a complete 2-piece Break Flange. Notice the inner groove on both half's of the break flange castings. When a Mueller Hydrant gets hit, the casting grooves break off into small pieces, as illustrated in the picture above. The remainder of the break flange castings remain bolted to the hydrant head bottom.

SAFETY FLANGE Rebuild Kit for all CENTURION Series with a Main Valve Size of 4-1/2"
Order #131183		$205.22
Consists Of	Ill. #	Description of part
(1)	A-10	Bonnet Flat Gasket
(1)	A-10	O-Ring for bonnet
(1)	A-25	Break Coupling Stainless Steel
(8)	A-26	Safety Flange Bolts and Nuts
(1)	A-27	Safety Flange Gasket
(1)	A-27	O-Ring style Safety Flange seal
(1) set	A-28	Safety Flange Pair
(2)	A-29	Cotter Pins
(2)	A-30	Clevis Pins
(1)	A-51	Lubricant (10.5 oz) for Bonnet
QTY:

SAFETY FLANGE Rebuild Kit for all CENTURION Series with a Main Valve Size of 5-1/4"
Order #131185		$205.22
Consists Of	Ill. #	Description of part
(1)	A-10	Bonnet Flat Gasket
(1)	A-10	O-Ring for bonnet
(1)	A-25	Break Coupling Stainless Steel
(8)	A-26	Safety Flange Bolts and Nuts
(1)	A-27	Safety Flange Gasket
(1)	A-27	O-Ring style Safety Flange seal
(1) set	A-28	Safety Flange Pair
(2)	A-29	Cotter Pins
(2)	A-30	Clevis Pins
(1)	A-51	Lubricant (10.5 oz) for Bonnet
QTY:

These genuine Mueller brand kits include all parts required for break flange rebuilding for any year Mueller Centurion series hydrant. Depending on your style, some parts included will not be used.

Kit is complete with pictured instruction sheet for installation. Special tools are not included in kits.


	Rebuilding of the hydrant Break Flange incurs the requirement of the bonnet dismantled. For this reason the following Mueller Maintenance Tools are required for dismantling and reinstalling the bonnet parts.


	SPECIAL TOOLS Required For CENTURION BONNET Rebuilding


	For Centurion Bonnet repairs, the following special tools are recommended. Their use is illustrated on our Centurion Bonnet Maintenance procedures page. The link is listed below.


	Hydrant Head Maintenance WRENCH




		The large end is used to remove and install the Hold Down Nut [in red] from all Mueller Hydrants.


	The middle of the wrench removes the weather cap and operates both rocker and pin lug adapters that are attached to the nozzles.


	The Small end is called a Wrench Nut. The wrench nut ends of the hydrant nozzle CAPS should have the same Shape and Size as the Operating Nut.

NOTE**



	Please specify the Size and Shape of the Wrench Nut when ordering. National Standard size and shape is 1 1/2" Pentagon, measured from point to opposite flat. WHEN ORDERING: L&C supplies the Standard 1-1/2" Pentagon Size unless otherwise noted. Square, Hexagon, or other types can also be furnished.

Description

LC №

Each

Order

Mueller Hydrant Head Maintenance Wrench

131173

$ 29.41


	BRASS SLEEVE for bonnet removal

The bonnet removal Brass Sleeve is used to protect the Bonnet O-rings and stem threads from being damaged when removing and/or replacing the Bonnet Assembly back onto the upper barrel. For Centurion and Improved design dry-top hydrants. The sleeve is 14" long and includes a detent inside of sleeve. This detent makes the sleeve a threaded On and Off design.
This holds the Brass Sleeve onto the stem threads while you are removing and reinstalling the bonnet.

Description

LC №

Each

Order

14" Brass Sleeve with Detent for Mueller Bonnet repairs

131177

$ 68.00




	The sleeve is 11" long. For Centurion and Improved design dry-top hydrants. No detent inside of sleeve.

Description

LC №

Each

Order

11" Brass Sleeve for Mueller Bonnet repairs

131175

$ 38.50

Maintenance Procedures

Maintenance Procedures




	Manuals or other information available for download are listed below

Click Here To Download the entire Mueller
Centurion Series Operating Manual

FILE SIZE: 1630kb
Adobe Acrobat Reader or equal Required


	Centurion® Hydrant Maintenance and Repair - (Length 20:03)


	Dial Up Speed (34Kbps - 160x120)

	Slow DSL (102Kbps - 240x180)

	Fast DSL (244Kbps - 320x240)

Note on downloading the above manual and/or movie file
It is best if you right click the file that you want, a window will pop up. Selection the option of "Save Link As". Another window will pop up usually defaulting to Save In "Desktop". Click Save.






	MINIMUM CREDIT CARD ORDER IS $25.00


	Our order desk and technical support phone lines are available Monday - Friday 7:30 AM - 4:00 PM (EST) call 518-762-7024 OR Fax us 518-762-7032


	sales@landcsales.com service@landcsales.com

		All Content Copyrighted © 1986-2009 - landcsales.com L&C MUNICIPAL SALES, Inc. All Rights Reserved. All trademarks/brands property of respective owners